Filter By:
Tools & Tuning
$39.00 - $300.00
The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It’s a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow.
- HS5 can be used as a race wax alone or as a base for top coats.
- Recommended iron temp: 150°C (311°F).
- -10°C to -18°C (14°F to 0°F).
$39.00 - $300.00
HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 155°C (311°F).
Highlights:
- Fantastic allround glider
- For training and competition
- Great performance and durability
- Fluoro-free and non-toxic
- Exists also in liquid
- Well tested on many conditions
$39.00 - $300.00
HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (302°F).
Highlights:
- Fantastic allround-glider
- For training and competition
- Great performance and durability
- Fluoro-free and non-toxic
- Well tested on many conditions
$39.00 - $300.00
A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Replaces the LF8X.
Highlights:
- Easy to work with
- For training and competition
- Great performance and durability
- Fluoro-free and non-toxic
- Well tested on many conditions
$199.00
Wax table, perfect at home or at events.
Waxing table that is easy to fold together. One leg is height adjustable for better stability on uneven surfaces. Fits two sets of cross country waxing profiles (T0766). Table top: 96 cm x 45 cm. Height: 83 cm. Weight: 11.5 kg/25.3 lbs.
$180.00
Space efficient and stable!
Wax table, perfect at home or at events.
Waxing table that is easy to fold together. Comes with four rubber feet for anti slip. One leg adjustable for better stability on uneven surfaces. Adjustable height: 87 cm, 85 cm or 75 cm. Fits two sets of cross country waxing profiles (T0766). Table top 120 cm x 35 cm. Net. weight: 11 kg/24 lbs.
$159.95
Bench vise for alpine skis.
- Three-piece entry level model
- 20 mm width ski holder.
- Waist width of skis from 35 mm to 80 mm.
$140.00
Lightweight and tailor-made for SWIX tables!
Cross Country profile in plastic, To use with our wax tables, For all skiers, Lightweight and stable.
Thermo plastic profile for cross country skis. Fits into waxing tables T0076, T0076-2, T00754, T0075W. Same profile both in the front and back. Includes holder for fixing the binding. Suitable for both classic and skating skis in lengths from 170-210 cm. Lightweight and very stable to work with. Weight: 1.4 kg/3.2 lbs.
$129.95
Good wax iron for alpine and cross country skis.
110 Volt, 500 Watt. The 8 mm thick plate gives a stable temperature. T73 has manual choice of temperature by indication of degrees and is simply done by an adjustment wheel. Adjustment range from 100°C to 165°C. Also available for 220 Volt (product # T73220).
$35.00 - $120.00
Protects the wax base during transport and is easy to prepare for the next training session.
- Wide range of applications, 0°C to -10°C.
- Easy to apply with a waxing iron.
- Easy to scrape and brush.
- Fluoro-free
$15.00 - $120.00
The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F)
- Recommended iron temp: 150°C (311°F).
- Replaces the CH5X.
- -10°C to -18°C (14°F to 0°F).
$15.00 - $120.00
PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F).
- Recommended iron temp: 145°C (293°F).
- Replaces the CH6X
- -6°C to -12°C (21°F to 10°F).
$15.00 - $120.00
PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. PS7 is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F).
- Recommended iron temp: 140°C (284°F).
- Replaces the CH7X.
- -2°C to -8°C (28°F to 18°F).
$15.00 - $120.00
PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F).
- Recommended iron temp: 130°C (266°F).
- Replaces the CH8X.
- -4°C to +4°C (25°F to 39°F).
$120.00
Waxing profile for when you are traveling. For prepping cross-country skis.
- Travel profile
- For cross-country skis
- For skiers on the go
- Takes up minimal space
$39.00 - $100.00
HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. For racing, we recommend going with a top coat as the final layer. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F).
Details:
- A popular wax in nordic disciplines
- Good water repellent properties
- Replaces LF10X
- For training and competition
Highlights:
- For warm conditions
- Easy to work with
- For training and competition
- Great performance and durability
- Fluoro-free and non-toxic
- Well tested on many conditions
$60.00
Great economy wax iron for alpine and nordic. Value for the money!
110 Volt. 1000 Watt. Great economy iron which is competitive with far more expensive models. Redesigned from scratch with an ergonomic body and a wide metal plate that suits both alpine, snowboard and nordic. Angled at one side to make it easier to keep a constant speed when melting the wax. The thick metal plate ensures a stable heating. Plate dimension 100x160 mm. Also available for 220 Volt (product # T77220).
$55.00
Mount the Swix T0014HPS-2 on a drill with a minimum rotation speed of 1500 rpm. Then attach the brush to the handle. Move it in overlapping motions from the tip to the back.
$50.00
Complete kit for maintenance of steel edges. Takes down the side edge to 88 or 87 degrees. Contains practical file guide in pocket format with file, diamond grindstone for polishing, coarse grindstone for removing hardened steel, and ski brake retainers.
$49.00
Brushes for smoothing out klister. Gives a very smooth surface.
- Klister brushes
- For smoothing klister
- For skiers who train and compete
- Achieves a brilliant result
$44.95
Extra fine diamond grindstone for polishing steel edges on skis and snowboards.100 mm.
- Diamond file
- For snowboards and alpine skis
- For alpine skiers and snowboarders
- Sharp and exact
$19.95 - $40.00
Gives faster skis.
Cleaner & conditioner glide sections of racing skis and snowboards.
- Ski Cleaner for glide zone.
- For everyone who waxes their skis.
Cleaner for fluoro glide wax and CH-wax. Improves glide and conditions the base. For glide sections only on all racing skis and snowboards. Involves no hard mechanical treatment of the base. No wearing of the stone grind pattern in the ski base. Makes the ski faster! Apply cleaner (I84C) with Fiberlene. Brush with white nylon brush while wet. Wipe clean with Fiberlene. Let dry for 5-30 minutes. Brush with hand steel brush (or Roto steel brush). Wax with Base Prep wax. 16.9 fl. oz.
$40.00
Liquid glide wax for racing and fast training sessions. HS7L is recommended from -2 to -8 degrees.
- A very good glide wax for traditional winter conditions
- No need for a waxing iron
- Replaces CH7XL.
$40.00
HS liquid glide waxes are so easy to use that anyone can achieve a good result without having a dedicated waxing booth or lots of extra equipment. Glide wax spray is a popular choice for leisure skiers.
High Speed (HS) is specially developed for younger racers and the ambitious leisure skier. All waxes in this series have high performance and good durability. This makes them an affordable option for both competition and training.
About HS8L: A liquid training and racing wax that can be used alone or as a base for other glide products. The HS8L is extremely versatile on both sides of zero with very good feedback from racing service. It works just as well on old snow at minus temperatures as falling fresh snow and plus degrees. Quite simply a “must have” product for conditions you will encounter frequently.
How to apply HS8L: Spray on the ski, wait 15 minutes and brush off with a T21 natural cork with felt.
- Amazing glide wax that is easy to apply
- For training and racing
- Improves ski glide
- Fluoro-free and 100% biodegradable
- Also available as hot wax
- Thoroughly tested in different conditions
$37.00
Racing file guide for side edges, made of hard aluminum. 88°
- Tool for side edges
- For filing steel edges
- For alpine skiers and snowboarders
- Extremely precise
$35.00
HS liquid glide waxes are so easy to use that anyone can achieve a good result without having a dedicated waxing booth or lots of extra equipment. Glide wax spray is a popular choice for leisure skiers.
High Speed (HS) is specially developed for younger racers and the ambitious leisure skier. All waxes in this series have high performance and good durability. This makes them an affordable option for both competition and training.
About HS10L: A liquid training and racing wax that can be used alone or as a base for other glide products. HS10L is optimized for very wet conditions when the snow has been transformed. Ideal in spring for dirty snow conditions. A good choice that never underperforms in warm conditions.
How to apply HS10L: Spray on the ski, wait 15 minutes and brush off with a T21 natural cork with felt.
Features:
- Fantastic for warm conditions
- Improves ski glide
- For training and racing
- Fluoro-free and 100% biodegradable
- Also available as hot wax
- Thoroughly tested in different conditions
$35.00
HS liquid glide waxes are so easy to use that anyone can achieve a good result without having a dedicated waxing booth or lots of extra equipment. Glide wax spray is a popular choice for leisure skiers.
High Speed (HS) is specially developed for younger racers and the ambitious leisure skier. All waxes in this series have high performance and good durability. This makes them an affordable option for both competition and training.
About liquid HS6: A liquid training and competition slide wax that can be used alone or as a base for racing products. Specifically designed for cold conditions down to -12°C. At lower temperatures than this, traditional waxes are usually better than liquid products. HS6L is a versatile wax that works well in all snow conditions, but is at its best when humidity is high.
How to apply HS6L: Spray on the ski, wait 15 minutes and brush off with a T21 natural cork with felt.
- Amazing universal glide wax
- For training and racing
- Improves ski glide
- Fluoro-free and 100% biodegradable
- Also available as hot wax
- Thoroughly tested in different conditions
$30.00
Effective wax remover and cleaner.
The Citrus Solvent is a 100% citrus-based product, formulated to minimize health and fire hazards, which also is a strong solvent. Liquid. Remove as much wax or klister as possible with a scraper before the base is cleaned and wiped off with Fiberlene paper. 16.9 fl. oz.
*Flammable liquid and vapor. May be fatal if swallowed and enters airways. Causes skin irritation. May cause an allergic skin reaction. Very toxic to aquatic life with long-lasting effects.
$29.95
Sharpener for plexi scrapers with short, sharp file, 40 mm. Can be mounted on a wall or waxing table. It is important to use sharp scrapers when prepping. Sharp scrapers enable you to remove wax more easily and efficiently. The file can be flipped over and used on both sides for longer durability.
- Sharpening tools
- For plexi scrapers
- For all ski waxers
- Sharp file
$29.00
Green base klister that is used as the first layer of klister. Temperature range -15°C to +10°C. NB: Apply thinly. Then apply regular klister for the relevant conditions as the next layer. Spray nozzle that makes it easy to apply a very even and thin layer of klister. To apply the base klister, hold the can upside down and move it slowly along the base, on each side of the central groove, while spraying. Hold the can approx. 4-5 cm. above the base. Great for both racing and recreational skiing.
- Green base klister
- Easy to apply.
- Hold the can upside down and move it slowly along the base to apply the klister.
- Great for both racing and recreational skiing.
- An alternative to KX20.
- No iron needed.
Page 1 of 3
Next page